ExtremeSwitching (EXOS/Switch Engine) - Page 530 - Extreme Networks

ExtremeSwitching (EXOS/Switch Engine)

Questions and discussions about EXOS

Forum Posts

Sorted by:

Start a conversation

EXOS Policies: how to allow bpdu and VRRP?

Hello, everybody! Could you please tell me Ethertype value for EMISTP? I have to allow these packets in access rule applied to VLAN. Should it be something like entry EMISTP-BPDU { if match all {ethernet-type 0x???? ; } then { permit ; } } I w...

About the remote-mirroring packet for XOS

Hello All, I have a question about the remote mirroring behavior for EXOS. When Extreme switch transfers a packet for remote mirroring, is the mirroring packet a software forwarding? Or software forwarding? I think that Extreme switch is using the h...

MLAG VRRP Member Switch Connection

Good Evening, I was testing a MLAG/VRRP setup today and couldn't get a member switch LAG to connect to the two cores. The two cores seem to be working correctly, they are able to ping each other and the VRRP address that is configured. When I do a...

DoS-Protect Implementation Issue...

We are facing some issue with TCP Synflood in our Network. Now we are trying to implement DoS-Protect to prevent this. We have enabled the DoS-Protect in Extreme Switch. But, we are not getting any logs related to DoS-Protect. But, We have check t...

MSM-A: Notify-threshold for L3 Protect packet count of 3500 reached

if I try to connect a new access switch (Summit X440-48) to the core switch (BD8006) I read after some minutes the following entry in the log file: MSM-A: Notify-threshold for L3 Protect packet count of 3500 reached MSM-A: Added an ACL to port 4:1, ...

Top Kudoed Authors

User

Count

28

27

20

20

17

GTM-P2G8KFN