cancel
Showing results for 
Search instead for 
Did you mean: 

Upgrade Path VOSS 6.1.2.1 to 8.5.1.0

Upgrade Path VOSS 6.1.2.1 to 8.5.1.0

PerryD
New Contributor
I have over 100 VSP Switches to upgrade and am looking to confirm how I get from 6.1.2.1 to 8.5.1.0

Are there any steps or do I go straight to it?

Thanks!
1 ACCEPTED SOLUTION

TQU
New Contributor III
Hello Perry, 

To upgrade VOSS from 6.1.2.1 to 8.5.1.0, based on Release Note information, supported upgrade path is : 
6.1.2.1 -> 8.1.x -> 8.5.1.0
I recommand to use the 8.1.10.0 release. 
but WARNING ! Current (6.1) management system is rebuild in 8.2+ to move on a segmented management. If you upgrade without any change, you will loose your managment access. 
I recommand to you to read the Release Note of 8.2.0 software to check which modifications you need to do. 
 
Regards, 
Théo

View solution in original post

1 REPLY 1

TQU
New Contributor III
Hello Perry, 

To upgrade VOSS from 6.1.2.1 to 8.5.1.0, based on Release Note information, supported upgrade path is : 
6.1.2.1 -> 8.1.x -> 8.5.1.0
I recommand to use the 8.1.10.0 release. 
but WARNING ! Current (6.1) management system is rebuild in 8.2+ to move on a segmented management. If you upgrade without any change, you will loose your managment access. 
I recommand to you to read the Release Note of 8.2.0 software to check which modifications you need to do. 
 
Regards, 
Théo
GTM-P2G8KFN