Hi, Yes, vlan type is port-mstprstp and it works with 8.10 release. For your information, "vlni 1/10" is an alias for "show interfaces gigabitEthernet vlan 1/10" in the application ACLI (terminal client). regards, TQU
Hi Mike, The configuration provided by Jave looks good. Can you tel us more about your setup ? did you try to reach the mgmt ip from a host directly connected on the switch ? or only from remote host ? from same subnet (100) or different ? Do you che...
Hi Mirhan, You have to upgrade both Diag and image files but yes you can go directly from 5.3.0 to 5.3.15 (or 5.3.16). Check the Release note to find information about upgrade path.If no warning are present and upgrade path section is blank, you can ...
Hi ConfigTerminal, Yes, it sound normal. You should also check the FA interfaces ("show fa interfaces") on the VSP side. It should display the MLT109 as FA interface. Regards, TQU
HI EF1, Yes you can apply SLPP-Guard on port, to send slpp packet to the Stack-2 and use slpp-guard on. About a loop in MLT, what can generate it ? misconfiguration or config loss on stack-2 ? About config loss, you should use LACP. If stack-2 have c...
