ExtremeSwitching (VSP/Fabric Engine) - Page 45 - Extreme Networks

ExtremeSwitching (VSP/Fabric Engine)

Questions and discussions about VSP/Fabric Engine

Forum Posts

Sorted by:

Start a conversation

Resolved! Dual attachment VSP > 5320

Hello,I want to put a double attachment between 2xVSP and 1x5320The 5320 is linked to ExtremeCloud IQ. I have configured my 2 ports as LAG, so LACP is enabledOn the VSPs, I have smlt enabled on 2 ports.But my link is not going up.Do you have any advi...

Auto-Sense Voice and non IP phones

Hey guys, I have a mediatrix gateway which supports LLDP med with VLAN override so I was going to try and pass back a blank accept policy from control and let the switch place the device tagged on the auto sense voice vlan. (this is great for large d...

VSP 7400 - QoS CoS 7 trouble

We are a service provider and are trying to turn up our first SLA circuit coming off of this fabric network. We are trying to pass RFC testing across our fabric made up of VSP 7400s. This is a straight layer 2 transport on our segment. We are cur...

Resolved! Does VoSS (VSP8600 running 8.1) support Cisco ipsla alike functionality

A static route pointing to virtual IP remains active until the ARP entry timeout (minutes to hours), with an ipsla equivalent feature the route would become invalid within seconds.I found EXOS supports ipsla and there is also a "protection" option as...

Fabric Attach pros/cons

Hi all,I'm halfway through my first Fabric Connect deployment, and looking for in the field experience with Fabric Attach.At this network's core are two server rooms, with a VSP 7400 and a 5520-24t running VOSS in each one, then we have X450G2 stacks...

Top Kudoed Authors

User

Count

34

18

18

18

7

GTM-P2G8KFN