AP3805i don't register with V2110 Controller

  • 0
  • 1
  • Problem
  • Updated 2 years ago
  • Solved
When trying to register my AP3805i Accesspoint on my remote site that is connected via PPTP Tunnel at my V2110 Controller, I don't succeed. Accesspoints are shown in the AP List, are approved, set the right MTU size (checked with ping), are pingable (both ways), but when i check the TCP Dump of the Controller i see the AP sending ?Discover? and then try to Register 5 times (both WASP Protocol) but there is no answer but another ?Discover? from the Admin interface of the controller.

My Topology is as follows: admin interface Gateway, PPTP Tunnel, physical, 10.10.88.x routed, IPs at the remote site 192,168.15.xxx routed, no masquerading (NAT), B@AP untagged for the wireless setting

what did i misconfigure that the AP doesn't get online

help would be really appreciated!
Photo of Peter Kulmbrein

Peter Kulmbrein

  • 1,178 Points 1k badge 2x thumb

Posted 2 years ago

  • 0
  • 1
Photo of Gareth Mitchell

Gareth Mitchell, Extreme Escalation Support Engineer

  • 5,690 Points 5k badge 2x thumb
Official Response

Are you still experiencing issues?  If so do you have a route that is not via the admin port default gateway that points to the AP's 192.168.15.x ie via esaX?