ExtremeWireless (Identifi) - Page 55 - Extreme Networks

ExtremeWireless (Identifi)

Questions and discussions about Identifi devices

Forum Posts

Sorted by:

Start a conversation

Extreme Wireless - Controller as HA Pair and AP Sites feature for bigger branches

At a given customer szenario we have 2x V2110 as central wireless controllers (V10.41.). We use PSK and 802.1x (EAP-TLS) Authentication against Extreme Control (NAC). Now we thought about the opportunity to use "Site" feature at 2 bigger branches to...

10.41.10 - dashboard, low link speed shows wrong value

Hi, I've just upgraded a customer controller from 10.41.05 to 10.41.10 and now the dashboard show 213 APs with low link speed = all APs. I've checked one switch with about 10 APs and the "show port no" result is that all the AP ports are actual sp...

Decoding Identifi DCS stats

A teacher reported her class was having trouble streaming video, I checked /proc/dcs on the AP3915i and could see there was high utilsation: R0 upt relt nfAvg utilAvg txAvg rxSelf rxAvg nfRt utilRt txRt R1 upt relt ...

3912 ibeacon power setting

I am running code rev 10.41.07.0014 and working on configuring a handful of 3912 access points as iBeacons. I have successfully configured the UUID, Major, Minor, update interval, but I do not see where I can program the power setting. Can someone...

3805 Ethernet Speed

The data sheet for the 3805 access point shows that the ethernet port supports up to 1000 Mbps but on our c5210 I only see options to configure it up to 100 Mbps. Am I missing something somewhere?

Top Kudoed Authors

User

Count

20

11

10

8

5

GTM-P2G8KFN