How to create Virtual Controller redundancy

  • 0
  • 1
  • Question
  • Updated 2 months ago
HI all,

I am using AP 7532 & AP 7522E, Both firmware are 5.9.2. can i create vc redundancy for these both AP's? possible means guide me. now AP 7532 is a virtual Controller. 
Photo of Saravanamurthy K

Saravanamurthy K

  • 926 Points 500 badge 2x thumb

Posted 2 months ago

  • 0
  • 1
Photo of Christoph S.

Christoph S., Employee

  • 3,230 Points 3k badge 2x thumb
Photo of Christopher Frazee

Christopher Frazee, Employee

  • 1,862 Points 1k badge 2x thumb
This should be supported, but we currently have a known issue with the AP7522E being converted via upgrade to v5.9.2:

AP7522E v5.9.2.1 ignores adopt request from regular sku AP75xx with the following message.

Jul 24 15:10:10 192.168.3.158 2018-07-24T15:12:17.010422-07:00 AP7522VC DPD2: 2018-07-24 15:12:17 mlcp.c:946 mlcp_handle_discover Ignoring discover from non-WiNG Express device

We have SPR (Software Problem Report) #3484 against this issue and issue will be resolved in a future v5.9.x release. 

For the time being, I would not configure an AP7522E v5.9.2 as VC redundant until we resolve SPR #3484.
Photo of Saravanamurthy K

Saravanamurthy K

  • 926 Points 500 badge 2x thumb
I tried that link basis. but i dont know where it is Option for RF Domain Manager.
Photo of Christoph S.

Christoph S., Employee

  • 3,230 Points 3k badge 2x thumb
As Chris Frazee mentioned, you might want to hold off on configuring the AP7522E as VC redundant, until SPR #3484 is resolved. 

But to answer your question, the setting is at the bottom of the General page: