Using FlexView to aggregate Client information , how to select OIDs?

  • 0
  • 1
  • Question
  • Updated 3 years ago
  • Doesn't Need an Answer
Dear All

I try to using FlexView to aggregate client's information (IP,  MAC, and which port he come from) on swirch

In  switch like 430 , 440  it seem no problem, and OIDs I us like:
 
but the same FlexView I using to show BD8806 's  client information , the port will show 6XX  5XX:
 
Does it need to using different OIDs to show real port on BD ? or it 's using same OIDs , but 645 means slots 6's port 45, it has slot 's mark before real port number? 

the second question is   I also export this result to html and csv file .

for html  it lost  mac address 's information

for csv file it lost ReqID


Does it need to change any options 's setting for showing full information  when I export?

My Netsight 's version was 6.2.0.221.

Thank for everyone's help.


Hunt.Liao 
2015/10/5 10:15 AM  
Tiwan
Photo of Hunt Liao

Hunt Liao

  • 130 Points 100 badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Bharathiraja, Suresh

Bharathiraja, Suresh, Employee

  • 3,536 Points 3k badge 2x thumb
Hi Hunt,

What all are the exos versions for X430, 440 and BD ?

Thanks,
Suresh.B
Photo of Hunt Liao

Hunt Liao

  • 130 Points 100 badge 2x thumb
Dear  suresh

switch 's version  15.3
BD 's version       12.4

Did you mean it  different OIDs between two version  so I get  wrong show ?

Hunt.Liao 
2015/10/05 12:07 PM
Taiwan
Photo of Murphy, Daniel

Murphy, Daniel, Employee

  • 632 Points 500 badge 2x thumb
Question 2:  - Export issues with FlexViews there were several bugs corrected in 6.3 related to Export showing consistently the same columns between CSV/HTML.  Are you able to upgrade?