cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 

What is the equivalent of sub interface cisco command in extreme x250?

What is the equivalent of sub interface cisco command in extreme x250?

rmonfared
New Contributor
What is the equivalent of sub interface cisco command in extreme x250?

5 REPLIES 5

Sean_Brady
New Contributor II
As Parthiban said, Extreme doesn't use sub interfaces. The closest equivalent would be adding the port to the vlan tagged.

The statements "config vlan10 add ports 48 tagged" and "config vlan20 add ports 48 tagged" would cause port 48 to behave the same as a Cisco port using the sub interface command, sending traffic belonging to vlan 10 and 20 on port 48 as tagged frames. The IP address and tag information are defined under the vlan configuration in Extreme, not the interface, as you can see in Parthiban's example above.

jawhar
New Contributor
Thanks,

PARTHIBAN_CHINN
Contributor
There is no sub interface command in extreme We only create multiple vlans and add ipaddress

jawhar
New Contributor
Dear Prathiban...

Thnaks for your detailed reply...

Since the below post which cammand is equalend to subbinterface cammand if we campare to cisco configaration

GTM-P2G8KFN