I am currently a certified ENA and ENS, and have completed the Netsight and Wireless specialist certifications this year. I need to maintain my ECE level of certification, and would appreciate some guidance as to which classes and exams I ne...
A bit more elaboration- The LACP configuration is defined prior to the mlag, via the 'enable sharing' command. When using LACP with MLAG, you have to define the LACP characteristics on the individual port(s) prior to adding them to the MLAG. In es...
Thank you for your responses! One additional question - I deal exclusively with EXOS. Does maintaining my ECE require me to cross train and certify in EOS, as it appears from the replies? I have no interest in picking up EOS and hope that is not t...
I am running code 15.3.1.4patch1-44 on an x670v and the output of show port transceiver info detail gives me the requested information.
sho ports transceiver information detail
Port : 1
Media Type : SF+_SR
Vendor Na...
If you wish to keep the IP address assigned to the VLAN and simply have it not be in the route table, you can "disable ipforwarding vlan vlan1" and it will disable IP forwarding in and out of the VLAN on that interface. If you execute this command, ...
Uber, you can also mirror an entire VLAN to a monitor port. Depending on the amount of traffic on the VLAN this could potentially saturate the monitor port.