XOS stacking commands not visible in "show config"

  • 0
  • 1
  • Question
  • Updated 3 years ago
  • Answered
During the last weeks i configure several X440 and X670 stacks with XOS V15.6.2.x. After setting up the stack with the needed commands all works fine. Then i want to see these entered commands in the "show config" or "show config all" output - but they are not visible there.

Does a command exists which makes the internal stack config visibile ?
Photo of M.Nees

M.Nees, Embassador

  • 9,262 Points 5k badge 2x thumb

Posted 3 years ago

  • 0
  • 1
Photo of Bill Stritzinger

Bill Stritzinger, Alum

  • 6,036 Points 5k badge 2x thumb
Matthias,

No, the stacking configuration is stored in the NVRAM of the switch, therefore you do not see any stacking related commands in the configuration file.  There are specific stack commands like "show stacking" , etc - you can also see the stats on the stacking ports - "show ports stacking-ports stat"

Bill
Photo of Alexandr P

Alexandr P, Embassador

  • 12,092 Points 10k badge 2x thumb
Also show stacking detail
Photo of Patrick Voss

Patrick Voss, Alum

  • 11,574 Points 10k badge 2x thumb
"show stacking configuration" as well