I am starting to look at ANSIBLE as a COVID19 learning project. Curious if anyone has built anything with ANSIBLE for VSP/VOSS management. Willing to share you work and experience? Thanks Full disclosure, as my titles reads I do work at Extre...
If you are running the switch in FabicEngine mode, but without SPBm you just make sure that your VLAN has an IP address, then turn on routing.#ip routing enabled.Or assuming you have your SPBm/ISIS configured and running..........step 1. Create the...
If the console cable and terminal settings work perfectly fine for the other 3 switches, but not for that one switch, I would open a ticket with Extreme GTAC. Another thing you can try is to have the console cable in the switch and power cycle the s...
Just remember that not all APs and Switches are supported in XIQ-Cloud. As a rule only AeroHive AP and newer Extreme Cloud enabled AP are supported in XIQ. And newer EXOS and VSP switches.Once you create your XIQ account you can see the list of supp...
You have posted this in the wrong page. you might wish to delete this post and re-post in the VSP/FabricEngine section. And include the screen shots when you do that.