Extreme Networks

XTRMUser

I have XIQ Site Engine, version: 22.9.10.73. ERS 4900's running 7.9.3.027, and VOSS running 8.6.1.0.A few questions:1. When I add devices, do I want/need both sflow and application telemetry or just application telemetry?2. I have added some 4900's, ...

XTRMUser · 12-07-2022

Here is the path I want to have for a video multicast. So using IGMP, and this is L2 (vs L3). I put it on a vlan, with an I-Sid. I've turned on snooping and proxy. It appears to be getting lost on the VSP somewhere. I think it's getting lost on the t...

XTRMUser · 07-13-2022

I've noticed this on all my ERS (4800, 4900, 5900), and on VSP switches (8400, 7400. 4450, 1400). I only get informational (not serious or critical) log messages on the syslog server and on XMC. Here is the code for ERS switches.logging remote addres...

XTRMUser · 05-24-2022

I have a stack of 3 5900 switches. I only need 2. I have moved the cables to the 2 switches, and would like to remove the 3rd switch. It is not a base switch. FW: 7.5.0.2, SW: 7.9.1.027I have found articles on how to add, and replace switches in stac...

XTRMUser · 04-12-2022

First time poster. A few questions, but related. All VSP's are running VOSS 8.4.3.01. I'm trying to limit access to the some ERS switch IP addresses using ACL's. The switches IP addresses are in a VLan. So far, I have IP's of permitted users (network...

XTRMUser · 12-22-2022

The cable box for the TV is not ours, and I can't access it. So I can't change the TTL.Multicast Hammer. I got it going. It was Windows Firewall issues.We are on Christmas break (or will be very shortly), and I won't be doing anything more with this ...

XTRMUser · 12-19-2022

I think I basically have this going. I haven't got my multicast to the last ERS switch, but I did put a receiver on the 2nd last switch (ERS) and watching the multicast (ok, TV, legally. We have 5 receivers from the local cable company, and I was try...

XTRMUser · 12-14-2022

I'm still having issues. So I'm trying to just get a multicast from the source ERS through the first VSP. I have a receiver on the first VSP. I was able to get a MC from one port (port 9) to another port (port 10) on the ERS. Here is code snippet for...

XTRMUser · 12-12-2022

The IP addresses I give the VSPs. They need to be in the same subnet, I presume, but otherwise can be any private IP subnet? They don't need to be defined anywhere on the network? I use 19.168.x.x and 172.16.x.x-172.31.x.x on the network, so I could ...

XTRMUser · 12-12-2022

I don't have any ip vrrp defined in my network, so I'm assuming that I don't need to add those commands/parameters to the "interface vlan" section of my multicast vlan.

Extreme Networks

User Statistics

User Activity

Application Telemetry on ERS 4900's and VOSS

Multicasting with ERS and VOSS

only information syslog messages reach syslog server

Remove ERS (5900) switch from stack

VSP and ACL's (and some XMC)

Re: Multicasting with ERS and VOSS

Re: Multicasting with ERS and VOSS

Re: Multicasting with ERS and VOSS

Re: Multicasting with ERS and VOSS

Re: Multicasting with ERS and VOSS