ā07-30-2020 08:09 PM
My AP121 isnāt working for SNMP GET queries. I have it configured for v3 (although Iāve also tried v2c and v1) via the ExtremeCloudIQ portal, and my AP122ās work perfect, but the AP121 doesnāt answer properly. Iām running the most current firmware (6.5.12), so Iām not sure why itās not working.
ā08-06-2020 01:37 PM
Here is what I get if I PING and SNMPWALK the AP from the shell of my monitoring server.
Here is the SNMPWALK for one of the AP122, using the same info.
Here is the switch configuration for both APs
ā08-06-2020 12:58 PM
Have you tested it from within the same subnet? Or can you mirror the switch port the AP is connected to and connect a sniffer to the mirror port?
I think there are two possibilities: Either the SNMP traffic becomes blocked anywhere or there is a bug in your firmware version.
ā08-06-2020 12:11 PM
I canāt get a connection to the AP on udp/161. SNMP tools respond with āTimed Outā. The output from āshow snmpā and āshow snmp v3-adminā are in the screen shot below. This is the exact same SNMP settings (policy) that use on my AP122 devices and the output from them shows exactly the same, so the config seems to be right.
Iāve already double checked to make sure that Traffic Filters have SNMP enabled on the Wired interface.
ā08-06-2020 08:03 AM
What do you mean with ā the AP121 doesnāt answer properlyā? Do you get no response? Or do you get wrong or missing information? What do you see when you enter āshow snmpā-commands at the CLI?