cancel
Showing results for 
Search instead for 
Did you mean: 

AP650 Troublesome ipads on PPSK

AP650 Troublesome ipads on PPSK

cforrest
New Contributor

We have a very odd scenario, we have a number of AP250s in our office all on 40mhz at 5ghz, we have recently introduced an AP650 with one int enabled on ac 20mhz @5ghz. With the theory to migrate all others soon to 20Mhz. On this AP and all others we have 3 SSID's the third is a PPSK network, we can see 1 client can connect to this but no others can, but we know the policy allows concurrent clients using the same key, when you walk out of this area the ipads connect fine. on all other APs AP250 on 8.4r10a, this is AP650 on the newest code. The other SSIDs however on the AP650 code 10.0r7a work with no issue.

 

I am purplexed to why this is. This quirk is very odd. Any suggestions would be welcome.

11 REPLIES 11

cforrest
New Contributor

Since a reboot early indications look good

cforrest
New Contributor

Hi again, so since yesterday I have done exactly your thinking and I can something quite odd, it seems as though the clients which cannot connect to this particular SSID

The odd thing here is 1.4 is not enabled I only have 0.4 enabled for this SSID

 

>> NCL2-AP369#show logging buffered                                                                         

2019-12-12 09:35:08 info  ah_cli: security: admin:<show logging buffered >

2019-12-12 09:35:02 info  kernel: [wifi]: [CLT_CAPS]wifi1.4: Add scb<4c:32:75:4f:16:7b>, waiting its probe req frame 1

2019-12-12 09:35:02 info  ah_dcd: wifi: [CLT_CAPS]Send 3485:841f:8467[4c32:754f:167b] <ASSOC REQ> trap successfully

cforrest
New Contributor

But i can see what you are thinking

cforrest
New Contributor

It spins then says incorrect password which it clearly isnt, which totally odd, given one ipad joins and the others have the same policy...even when i try on my iphone etc

GTM-P2G8KFN