This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Accept
Reject
Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Associating an SSID with a different Guest Subnet

Associating an SSID with a different Guest Subnet

AnonymousM
Valued Contributor II

‎06-20-2019 09:34 PM

Hi Guys,

 

Under the Guest SSID, I want to be able to create/add a new VLAN i.e VLAN20 which I've done and I've assigned it to the Guest SSID with the desired profile. But I don't think this is enough as the DHCP server is not on Aerohive, which is fine but I think I should have some option to tell or point "VLAN20" to the default gateway IP or this DHCP server but I can't seem to do that. As you would expect, my wireless device is associating with the guest SSID but getting a leased IP in the management VLAN1, which is wrong. Please can you help?

By the way, the port the AP is connected to is tagged with VLAN20

 

 

Thanks.

0 Kudos
1 REPLY 1

ashley_finch
Contributor III

‎06-21-2019 08:02 AM

Hello,

 

By adding VLAN20 in the profile, it's as much the same as connecting to a switch access port for VLAN20 thus an address for the DHCP server etc shouldn't be needed. If you do a VLAN probe from the tools tab for VLAN20 you can double check that the client will be able to get an IP. Is the port the AP is connected to a trunk port?

0 Kudos
GTM-P2G8KFN