Aerohive Migrated Content - Page 71 - Extreme Networks

Aerohive Migrated Content

Questions and discussions related to old aerohive products migrated over

Forum Posts

Sorted by:

Start a conversation

i have a couple of AP 230, that fails to update.

I have tried to delete and re-onboard them again, but still not managing updateing network policy..the AP I've been working on today has IQ Engine 10.0r8 build-236132 running. the mouse over "Device Update failed" ends with Caused by: Unknown.

Vlan assignment using client type/os. We want to assign a vlan upon connection to the network by device type/os. This would mean that an android device would be put on our internet only vlan and a windows laptop would be put on a staff vlan.

Vlan assignment using client type/os. We want to assign a vlan upon connection to the network by device type/os. This would mean that an android device would be put on our internet only vlan and a windows laptop would be put on a staff vlan.

One of our AP250 was put in un-mangaed. How do I get it back into manged on Cloud? I can't seem to figure it out. Below is what I see: The device XX-XXXX-AP was marked as unmanaged on 2020-03-12 12:20:19. The data shown is not current. HELP

One of our AP250 was put in un-mangaed. How do I get it back into manged on Cloud? I can't seem to figure it out. Below is what I see: The device XX-XXXX-AP was marked as unmanaged on 2020-03-12 12:20:19. The data shown is not current. HELP

We have issue with Aerohive Select., want to disable 2.4GHz on AP122 but cant find option ?

We have issue with Aerohive Select. They are having issues with Interferance on the 2.4GHz band. So we have disabled WiFi0 2.4GHz on 6 AP's in this area. I would like to use SDR to have both radios on the AP broadcasting on the 5GHz band. But I canno...

Resolved! I'm adding a new mgt VLAN and want to change the mgt0 static IP. However, when I update via the web portal, it says it takes the update, the config is saved, and the AP reboots. After that, it reverts to the old IP. (mgt native vlan sticks to the ne

I'm adding a new mgt VLAN and want to change the mgt0 static IP. However, when I update via the web portal, it says it takes the update, the config is saved, and the AP reboots. After that, it reverts to the old IP. (mgt native vlan sticks to the ne

Top Kudoed Authors

User

Count

4

3

3

3

2

GTM-P2G8KFN