cancel
Showing results for 
Search instead for 
Did you mean: 

CPU usage issues on AP230's.

CPU usage issues on AP230's.

mali
New Contributor III

What are these log entries for? Also "show system proc stat"s hows mdnsd is on the top.

 

2018-05-17 16:14:47 info   ah_scd: arbitrator ip is updated from 10.119.0.21 to 10.119.0.87

2018-05-17 16:14:47 info   ah_dcd: IDP: arbitrator ip is updated from 10.119.0.21 to 10.119.0.87

2018-05-17 16:14:44 info   ah_dcd: IDP: arbitrator ip is updated from 10.119.0.126 to 10.119.0.21

2018-05-17 16:14:44 info   ah_scd: arbitrator ip is updated from 10.119.0.126 to 10.119.0.21

2018-05-17 16:14:26 info   ah_scd: arbitrator ip is updated from 10.119.0.21 to 0.0.0.0

2018-05-17 16:14:26 info   ah_dcd: IDP: arbitrator ip is updated from 10.119.0.21 to 0.0.0.0

2018-05-17 16:14:17 info   ah_scd: arbitrator ip is updated from 0.0.0.0 to 10.119.0.21

2018-05-17 16:14:17 info   ah_dcd: IDP: arbitrator ip is updated from 0.0.0.0 to 10.119.0.21

2018-05-17 16:14:16 info   amrp2: create node 10.119.0.21(d854:a2cb:xxxx), no_eth_comp_count = 0

2018-05-17 16:14:14 info   amrp2: delete node 10.119.0.21(d854:a2cb:xxxx), no_eth_comp_count = 0

2018-05-17 16:13:42 info   amrp2: create node 10.119.0.21(d854:a2cb:xxxx), no_eth_comp_count = 0

1 ACCEPTED SOLUTION

mali
New Contributor III

So I had to upgrade some to newer code just so that their CPU would go down and I can push the new config to them that was weird. If I would simply reboot them in a matter of seconds CPU would spike again.

 

I am using Classic in this case. 8.2r1

View solution in original post

7 REPLIES 7

dsouri
Contributor III

Hi @Mohammad Ali​

 

For the AP230 in Hivemanager Software 8.2r1, the current Golden Release firmware is recommended. HiveOS 6.5r9a

 

Could you advise if the issues persist with an AP230 if running HiveOS 6.5r9a

 

David Souri

HiveCommunity Moderator

mali
New Contributor III

So I had to upgrade some to newer code just so that their CPU would go down and I can push the new config to them that was weird. If I would simply reboot them in a matter of seconds CPU would spike again.

 

I am using Classic in this case. 8.2r1

dsouri
Contributor III

Hi Mohammad,

 

I do believe you're right. The stability is most likely from disabling Bonjour.

 

Were you able to try a newer HiveOS?

 

I don't recall which Hivemanager you are using. Could you confirm if you are on Classic or NG?

 

If Classic, which version? Top Right Help button -> About Hivemanager

 

Thank you, Happy to assist,

David Souri

HiveCommunity Moderator

mali
New Contributor III

Hi David so looks like so far it has been pretty stable. Even on the 6.4r4 code. Which makes sense because I have disabled Bonjour so not seeing mdnsd as the top process any more.

Couple of AP's went up to like 31% or so and that was related to them processing high interrupts due to large packets but nothing major other than that.

 

 

GTM-P2G8KFN