09-20-2019 12:49 PM
Does anyone know how i can Disable the option "Enable client transmission power control (802.11h)" on WiFi0 and WiFi1. I have tried to do this bij edeting the Device template that is used on the AP's and push it out in the Hivemanager using Complete Configuration Update After the Ap has rebooted the setting has not been changed. How can i do this for multiple ( about 400) Ap's at once?
Kind Regards
Solved! Go to Solution.
09-20-2019 09:02 PM
Thank you for that data, at this point you're going to need a case so we can let our engineering team know that the template is not making it in to the running configuration or the generated configuration, which would explain why it's not getting applied.
09-26-2019 02:13 PM
Much appriciated!
09-26-2019 01:54 PM
Thank you. I've attached the data to the case for you and let the technician you're working with know we have that now. They'll be in contact with you shortly with the next steps.
09-26-2019 01:38 PM
Here you go,
09-26-2019 01:26 PM
This guide reviews how to get the tech data from HiveManager: https://thehivecommunity.aerohive.com/s/article/How-to-download-tech-data-in-HiveManager
And this guide reviews how to get tech data via the CLI of the AP in case that's easier: https://thehivecommunity.aerohive.com/s/article/Collecting-Tech-Data-via-CLI