Skip Background Scan When: Select from the following options:
Option 1
Clients are connected: Clear to prevent an AP with connected clients from scanning channels. Disabled by default.
Option 2
Connected clients are in power save mode: Select to allow an AP to scan channels when connected clients are in power save mode. You might want to disable this option if some clients (for example, MacBook 10.4.11), are experiencing intermittent connection issues when in power save mode. Enabled by default.
Option 3
Network traffic with voice priority is detected: Select to prevent an AP from performing a background scan when voice traffic is detected. Voice traffic takes priority and is the least forgiving of slow or degraded connections. Enabled by default.
Option 1 if cleared it would enable background scanning if clients connected.
Option 2 If selected it would disable background scanning when clients in power-save mode
Option 3 if selected it would disable background scanning when voice traffic detected.
When all three options are selected the config delta looks like this
no radio profile Profile_Name scan access voice
no radio profile Profile_Name scan access client
no radio profile Profile_Name scan access client power-save
Only Option 3 is correct.
