cancel
Showing results for 
Search instead for 
Did you mean: 

How can I configure SSID to allow LAN access? AP gets an IP from the internal DHCP scope.

How can I configure SSID to allow LAN access? AP gets an IP from the internal DHCP scope.

shawn_lim
New Contributor
How can I configure SSID to allow LAN access? AP gets an IP from the internal DHCP scope.
1 ACCEPTED SOLUTION

samantha_lynn
Esteemed Contributor III

Unless you are blocking traffic via an IP firewall, the APs can pass traffic to any resource on the same VLAN as the client traffic, as well as out to the default gateway for internet access.

View solution in original post

1 REPLY 1

samantha_lynn
Esteemed Contributor III

Unless you are blocking traffic via an IP firewall, the APs can pass traffic to any resource on the same VLAN as the client traffic, as well as out to the default gateway for internet access.

GTM-P2G8KFN