This website uses cookies. By clicking Accept, you consent to the use of cookies. Click Here to learn more about how we use cookies.
Accept
Reject
Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

i connected a new AP130, configured it, but it is not broadcasting. version is 6.51rb. There is an error-Device update failed,unable to save the image to flash memory. I rebooted the device, and tried updating to different versions from the gui

i connected a new AP130, configured it, but it is not broadcasting. version is 6.51rb. There is an error-Device update failed,unable to save the image to flash memory. I rebooted the device, and tried updating to different versions from the gui

cristy_yi
New Contributor

‎09-23-2019 01:44 PM

i connected a new AP130, configured it, but it is not broadcasting. version is 6.51rb. There is an error-Device update failed,unable to save the image to flash memory. I rebooted the device, and tried updating to different versions from the gui
0 Kudos
6 REPLIES 6

samantha_lynn
Esteemed Contributor III

‎10-01-2019 12:20 PM

Thanks for letting me know @Kittipong Khawsamlee​ , I've emailed you directly with the files you'll need.

0 Kudos

kittipong_k
New Contributor

‎10-01-2019 11:08 AM

I have the same problem, please kindly send me a firmware.

0 Kudos

cristy_yi
New Contributor

‎09-24-2019 09:00 PM

Aha! That was a newbee move on my part. All is working, thanks for your help!

0 Kudos

samantha_lynn
Esteemed Contributor III

‎09-24-2019 07:36 PM

There are, here is a guide for that: https://thehivecommunity.aerohive.com/s/article/Updating-HiveOS-from-CLI-using-SCP-TFTP-or-HTTP-s

 

But if you just remove the "s" from HTTPS in your URL, you should be able to get past the browser issue as well.

0 Kudos
GTM-P2G8KFN