i connected a new AP130, configured it, but it is not broadcasting. version is 6.51rb. There is an error-Device update failed,unable to save the image to flash memory. I rebooted the device, and tried updating to different versions from the gui

[cristy_yi]

i connected a new AP130, configured it, but it is not broadcasting. version is 6.51rb. There is an error-Device update failed,unable to save the image to flash memory. I rebooted the device, and tried updating to different versions from the gui

[samantha_lynn]

Thanks for letting me know @Kittipong Khawsamlee​ , I've emailed you directly with the files you'll need.

[kittipong_k]

I have the same problem, please kindly send me a firmware.

[cristy_yi]

Aha! That was a newbee move on my part. All is working, thanks for your help!

[samantha_lynn]

There are, here is a guide for that: https://thehivecommunity.aerohive.com/s/article/Updating-HiveOS-from-CLI-using-SCP-TFTP-or-HTTP-s

But if you just remove the "s" from HTTPS in your URL, you should be able to get past the browser issue as well.