cancel
Showing results for 
Search instead for 
Did you mean: 

SNMP to Zabbix does not work

SNMP to Zabbix does not work

bart1
New Contributor

Our nmap from our zabbix to our AP's work. But our snmpwalk -v 2C -c public gets timeouts.

we added an snmpserver in the hive control panel with the ip adress from the server

We have disabled to send traps over CAPWAP.

zabbix V2C GET public

 

when i go to the config of 1 of the AP's

 

This is what i see in the configuration of the AP

 

no interface eth1 shutdown

config rollback enable

system web-server enable

snmp reader version v2c community public 172.25.100.29

no snmp trap-info over-capwap

no snmp trap-info over-snmp

hive VHM-JWBTSSWY manage SNMP

no interface eth0 manage SNMP.

no interface eth1 manage SNMP

no snmp reader version any community hivecommunity

 

 

1 ACCEPTED SOLUTION

AnonymousM
Valued Contributor II

Hi,

 

Have you enabled SNMP on the device template / AP template settings for the Uplink Port on the APs?

 

 

It's easy to miss and is required for the APs to respond to the SNMP requests.

 

Best Regards

Joakim

View solution in original post

5 REPLIES 5

bart1
New Contributor

Ok we dont have a template assigned.

But i can not add the default aswell... but now at least i know in wich direction i need to look 🙂

 

thanks !!!!

AnonymousM
Valued Contributor II

Hi,

 

Have you enabled SNMP on the device template / AP template settings for the Uplink Port on the APs?

 

 

It's easy to miss and is required for the APs to respond to the SNMP requests.

 

Best Regards

Joakim

bart1
New Contributor

Still does not work.

root@host:/home/zabbix# snmpwalk -v 2C -c public (AP IP)

Timeout: No Response from (AP IP)

7f3a03a81eab4c2d962603c4d9e64c44_0690c000006FfTgAAK.png2018-10-01 09_07_08-HiveManager NG2018-10-01 09_06_20-HiveManager NG

samantha_lynn
Esteemed Contributor III

Unfortunately we will need traps over capwap to be enabled for SNMP to work. Could you enable those and test again?

GTM-P2G8KFN