What is the power consumption of AP1130 (can't find it in the datasheet) and how many AP1130's do you suggest to connect to an SR2208P (switch will only connect AP1130's)

[bjarte]

What is the power consumption of AP1130 (can't find it in the datasheet) and how many AP1130's do you suggest to connect to an SR2208P (switch will only connect AP1130's)

[AnonymousM]

I would say it would be the same or less than the AP230. The AP230 is a 3x3 which will use more power than a 2x2 like the AP1130 on average. For the USA both are capped at 100mW of transmit power. I will try to find more info but as always power consumption will depend. I've seen most hold at 15.4 with a few clients connected.

Also, the longer the wire run the more wattage required.

[bjarte]

Yes I know the standard, but I assume the AP1130 does not consume 25,5W all the time. If you for instance look at AP230, Power Draw : Typical 11.41W, Max 16.7W . This is the answer I was looking for.

[samantha_lynn]

The AP1130s use 802.3AT power, which would be 25.5W. The SR2208P has a power budget of 124W, so it could support 4 1130s total.