Wifi1 power level not accepted by AP130.

[mvrijsten]

We have a number of AP130 in the office and I just tried to set a static power level of 16 dBm for the Wifi1 interface. Some of the AP's get to work with the 16dBm , but a few get set on 10dBm. Can anyone help me why these are not set on 16dBm?

When I look on the problematic AP's, I do see that the power level is set to 16 when I do a Show Run:

interface wifi1 radio power 16

[mvrijsten]

Thanks, that was indeed the case!

[ashley_finch]

Going to make a presumption that the APs that will not go to 16 are on the UNII-3 band (channel 149-165). There is a limit of 10 on this band, hence why these are limiting themselves