Data Center (MLX & CER/CES) - Page 10 - Extreme Networks

Data Center (MLX & CER/CES)

Questions and discussions about MLX/CER/CES

Forum Posts

Sorted by:

Start a conversation

Brocade MLXe-4 core router does not display anything on console

Hi, We could not able to access Brocade MLXe-4 router, we tried below mention options to access router. It does not display anything on console. Pls suggest what to be done to access Brocade MLXe-4 router. 1. Changed baud rate 9600, 11520 etc......

Resolved! MLX cam partition issue

Hello  I have a warning in log about cam partition free space. Now profile is ipv4-ipv6-2 and table is almost full [ip] 786432(size), 39005(free), 095.04%(used) [IPV6] 65536(size), 6250(free), 090.46%(used) There are other profiles but i could...

GRE TCP MSS Adjustment on MLX

Hello all. How can i adjust tcp mss on gre tunnel with MLX? In documentation states: Modifying the TCP MSS value based on the GRE tunnel MTU configuration For example, on ethernet interface 1/1 the TCP MSS value is configured to 1400 bytes. The ethe...

NetIron CER 2024C snmp trap for rout-map threshold

Hello, I need some help with my snmp configuration. I have two NetIron CER2024C. They're used as border gateways. They have vrrp configured and VRF in order to distribute the traffic to the ISP. The thing is that I have a threshold set for each VRF...

Netiron CER 2024 slow throughput

We are seeing slow throughput through Netiron CER 2024 devices. Basically cut in half to what we are seeing from inside the device then what we are seeing coming from the internet using Iperf tests. There are no physical layer issues. Any suggestion...

Top Kudoed Authors

User

Count

2

1

1

1

GTM-P2G8KFN