Data Center (SLX) - Page 6 - Extreme Networks

Data Center (SLX)

Questions and discussions about SLX

Forum Posts

Sorted by:

Start a conversation

Resolved! SLX 9540 dosn't boot ok

The SLX was working fine, but I had problem when I tried to upgrade the firmware. I tried to install the firmware via onie rescue, but when I set the command (into de onie) "reboot global" (for error), the SLX started to reload, and then it seems to ...

Resolved! In need of vdx6720 nos3.0.1b firmware

just purchased this switch and found that it only has v2.1.1 on it , when trying to upgrade firmware it indicates that v3 is required before installing 4 or 4.1, I would appreciate any help. I do not have access to any downloads so if you have this f...

Resolved! ENS Checksum Mismatch reached maximum threshold(3) for Rbridge

hii guys , why does the ENS Checksum Mismatch log appear reached maximum threshold(3) for Rbridgeon a data center network. thankyou

Replicating a Cisco QinQ Config

Hi Guys,I am trying to figure out how to replicate a current config we have on a Cisco 9500 on one of our Extreme SLX 9640’s. The setup is basically we have a 100G port from a provider in an NNI style, so they shove multiple VLAN’s at us down this NN...

Resolved! SLX 9540 System Next-Hop limits exceeded. Current Profile Nexthop 4000. Configured Next-Hops 4000

Hi Guys,Is possible increase system next-hop limit ?I receive every day message:System Next-Hop limits exceeded. Current Profile Nexthop 4000. Configured Next-Hops 4000

Top Kudoed Authors

User

Count

7

1

1

1

1

GTM-P2G8KFN