I need to disable backup routing

[Neeraj_Singh]

while trying to disable backup routing its not working , refer below log 

efa fabric setting update --name fabric1 --backup-routing-enable no
Error :  fabric1: fabric is already active and cannot be updated

[Michael_Morey]

Neeraj,

The error is indicating that your fabric is already active, meaning that you have already pushed the configuration to the IP fabric via the "efa fabric configure --name [fabric_name]" command.  You will need to delete and recreate your fabric.

These settings are the only ones that can be updated after adding devices and configuring the fabric:

--p2p-link-range
--loopback-ip-range
--bfd-enable
--bfd-tx
--bfd-rx
--bfd-multiplier
--mctlink-ip-range
--single-rackdeployment
--md5-password-enable
--md5-password
--bgp-dynamic-peerlisten-limit

https://documentation.extremenetworks.com/efa/efa_3.0.0/admin/downloads/efa-3.0.0-adminguide.pdf

Please review page 88 of the admin guide.

Thanks, 

[Neeraj_Singh]

Hello Michael, 

DC is live now, if i delete and re-create the fabric i will have impact . is there any way via update or operation command if it can be modify that backup-ipv4 -range .?

ex-  efa fabric setting update --name FABRIC --backup-routing-ipv4-range <new ip>