- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
06-15-2020 08:29 AM
Hello,
I am trying to understand the issue SLXOS-37594 for our SLX setup.
The GT-article
https://extremeportal.force.com/ExtrArticleDetail?an=000057650
says, this issue has been fixed in SLX-OS 20.1.1 but in the release notes for 20.1.1 or 20.1.2a I am not able to find / recognize the issue.
So, has this been fixed and how do I know if “our” SLX 18r2bd version is affected right now, too?
Solved! Go to Solution.
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
06-15-2020 01:23 PM
I looked into the article and it appears rather misleading. I investigated the case history as well as the notes from our SLX Sustaining team and found the following:
- The issue is a non service affecting Display (CLI output) issue, IPv6 routes are not affected
- SLXOS-37594 was filed as an “Improvement” and is not a Software Defect, which is why it is not listed in the RN under “Defects”
- The display issue was caused by a HW SDK change which does not allow the command “show hw route-info” to read the compressed routes
- The new command is available in 20.1.1 and is planned to be released in 18r.2.00c ~ETA July 2020
Thanks,
Michael Morey
Principal Technical Support Engineer / Extreme Networks
Principal Technical Support Engineer
Extreme Networks
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
06-15-2020 04:24 PM
Thank you for clearing this and also for updating the article!
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
06-15-2020 01:23 PM
I looked into the article and it appears rather misleading. I investigated the case history as well as the notes from our SLX Sustaining team and found the following:
- The issue is a non service affecting Display (CLI output) issue, IPv6 routes are not affected
- SLXOS-37594 was filed as an “Improvement” and is not a Software Defect, which is why it is not listed in the RN under “Defects”
- The display issue was caused by a HW SDK change which does not allow the command “show hw route-info” to read the compressed routes
- The new command is available in 20.1.1 and is planned to be released in 18r.2.00c ~ETA July 2020
Thanks,
Michael Morey
Principal Technical Support Engineer / Extreme Networks
Principal Technical Support Engineer
Extreme Networks
