Data Center (SLX) - Page 9 - Extreme Networks

Data Center (SLX)

Questions and discussions about SLX

Forum Posts

Sorted by:

Start a conversation

MTU size on bridge domains SLX

I have a P2P circuit across several SLX 9540’s with the pw-profile of 9190 set in the bridge domain at each end. However, the end user at each side, cannot ping anything above 1500 MTU across this circuit. I have verified that the global mtu 9216 set...

Resolved! BGP priority for same AS

Hello AllI have following situation on my EDGE Router (SLX-9640) with BGP. I have many of Transit connections and AS’s on the same Router, and between them 2x of them are from same Vendor (AS) with two different speed (10G) and (100G).The question is...

Configure a VLAN Name

Hi all, I’m new to Extreme Networks and Brocade Switches. I’m trying to define a name to a VLAN that I create. I’m sure I’ve configured the VLAN ok, but when it comes to defining a logical name I’m lost (much easier in Cisco) anyway, thanks all i...

sFlow timeout

Hi Guys, We are running Extreme SLX 9640’s. We are using fastnetmon for DDoS detection. We need to be able to set flow timeout on sflow to match a field that fastnetmon uses for calculation. We cannot seem to set this on the extreme’s and i cannot se...

Doubt about a parameter in the interfaces of SLX 9140 equipment.

Hello Community,According to the attached image, what is the use of the parameter that says "Priority Tag disable"?Has anyone used it on network interfaces?Regards

Top Kudoed Authors

User

Count

10

1

1

1

1

GTM-P2G8KFN