05-05-2020 07:17 PM
I am struggling to get OSPF to work over MCT on the SLX 9030 platform. Ruckus and netIron support this functionality. I can’t even get basic connectivity (ICMP).
Sample Config - SLX 01
evpn sal-evpn
route-target both auto ignore-as
rd auto
bridge-domain add 65,4000
vlan add 65
router bgp
local-as 3607168000
capability as4-enable
fast-external-fallover
neighbor 10.56.56.1 remote-as 3607168000
neighbor 10.56.56.1 update-source loopback 64
neighbor 10.56.56.1 bfd
address-family ipv4 unicast
!
address-family ipv6 unicast
!
address-family l2vpn evpn
neighbor 10.56.56.1 encapsulation mct
neighbor 10.56.56.1 activate
router ospf
rfc1583-compatibility
area 0.0.0.0
auto-cost reference-bandwidth 100000
!
router ospf vrf management-vrf
rfc1583-compatibility
area 0
auto-cost reference-bandwidth 100000
## Interface in question
interface Ve 65
vrf forwarding management-vrf
ip ospf area 0
ip address 10.253.18.50/29
no shutdown
!
interface Ethernet 0/46
channel-group 63 mode active type standard
lacp timeout long
no shutdown
interface Port-channel 63
switchport
switchport mode trunk-no-default-native
switchport trunk allowed vlan add 65
no shutdown
!
cluster slx 1
peer-interface Ve 4000
peer 10.56.56.1
deploy
client AGG6610 1
client-interface Port-channel 63
esi 0:0:0:0:0:0:1:1:1
deploy
Cluster slx 1
================
Cluster State: Deployed
Client Isolation Mode: Loose
DF Hold Time: 3 seconds
Configured Member Vlan Range: 65,200
Active Member Vlan Range: 65,200
Configured Member BD Range: 65,4000
Active Member BD Range:
No. of Peers: 1
No. of Clients: 1
Peer Info:
==========
Peer IP: 10.56.56.1, State: Up
Peer Interface: Ve 4000
ICL Tunnel Type: VXLAN, State: Up
Client Info:
============
Name Id ESI Interface Local/Remote State
---- -- --- --------- ------------------
AGG6610 1 0:0:0:0:0:0:0:1:1:1 Port-channel 63 Up / Up
SLX-01# sh arp vrf management-vrf
Total Entries in VRF management-vrf : 2
Address Mac-address L3 Interface L2 Interface Age Type
------------------------------------------------------------------------------------------
10.253.18.49 cc4e.243e.3b16 Ve 65 Po 63 00:09:04 Dynamic
10.253.18.51 0004.96af.9a75 Ve 65 Tu 62465 (10.56.56.1) Never Bgp-Sticky
I am unable to ping 10.253.18.49!!
05-07-2020 02:26 PM
The SLX9030 does support OSPF over MCT. I assume the vrf is being specified when issuing the ping (Ex. SLX# ping 10.253.18.49 vrf management-vrf)? If possible, please open a support case to investigate the cause of the connectivity issues as needed.
05-06-2020 03:09 PM
That’s what I am afraid of. It doesn’t work and no one seems to be able to answer my question.
05-05-2020 09:26 PM
when i was evaluating the SLX last year I couldn’t get MCT to work at all.