slx 9140 trunk configuration

[Giuseppe_Casabl]

When I try to configure a trunk port on the slx 9140 I get following error

Testsystem02(config)# interface Ethernet 0/1

Testsystem02(conf-if-eth-0/1)# Switchport mode trunk

%%Error: Interface not bound to bridge

Testsystem02(conf-if-eth-0/1)#

Do you have any hints?

[Michael_Andreas]

tried on my device here and it woked . (9240) downgraded to your version
so you can try on the port a "no switchport" --> "switchport " ---> " switchport trunk"
if you still see the same error message i suggest to open a case with GTAC

[Giuseppe_Casabl]

17s.1.00

[Michael_Andreas]

hi Giuseppe ,
what version you are running ??

[Giuseppe_Casabl]

Testsystem02# sh run
clock timezone Etc/GMT
hardware
profile tcam default
profile route-table default maximum_paths 8
system-mode default
!
http server use-vrf default-vrf
http server use-vrf mgmt-vrf
logging raslog console INFO
logging auditlog class SECURITY
logging auditlog class CONFIGURATION
logging auditlog class FIRMWARE
logging syslog-facility local LOG_LOCAL7
logging syslog-client localip CHASSIS_IP
switch-attributes chassis-name SLX9140
switch-attributes host-name Testsystem02
no support autoupload enable
support ffdc
resource-monitor cpu enable threshold 90 action raslog
resource-monitor memory enable threshold 100 action raslog
resource-monitor process memory enable alarm 1000 critical 1200
snmp-server contact "Field Support."
snmp-server location "End User Premise."
snmp-server sys-descr "Brocade BR-SLX9140 Router"
snmp-server enable trap
system-monitor fan threshold marginal-threshold 1 down-threshold 2
system-monitor fan alert state removed action raslog
system-monitor power threshold marginal-threshold 1 down-threshold 2
system-monitor power alert state removed action raslog
system-monitor temp threshold marginal-threshold 1 down-threshold 2
system-monitor cid-card threshold marginal-threshold 1 down-threshold 2
system-monitor cid-card alert state none action none
system-monitor compact-flash threshold marginal-threshold 1 down-threshold 0
system-monitor MM threshold marginal-threshold 1 down-threshold 0
system-monitor LineCard threshold marginal-threshold 1 down-threshold 2
system-monitor LineCard alert state none action none
system-monitor SFM threshold marginal-threshold 1 down-threshold 2
telemetry profile system-utilization default_system_utilization_statistics
..truncated
!
telemetry profile interface default_interface_statistics
..truncated
!
line vty
exec-timeout 10
!
threshold-monitor Buffer limit 70
vrf mgmt-vrf
address-family ipv4 unicast
ip route 0.0.0.0/0 172.17.0.1
!
address-family ipv6 unicast
!
!
ssh server key rsa 2048
ssh server key ecdsa 256
ssh server key dsa
ssh server use-vrf default-vrf
ssh server use-vrf mgmt-vrf
telnet server use-vrf default-vrf
telnet server use-vrf mgmt-vrf
role name admin desc Administrator
role name user desc User
aaa authentication login local
aaa accounting exec default start-stop none
aaa accounting commands default start-stop none
service password-encryption
username admin password "BwrsDbB+tABWGWpINOVKoQ==\n" encryption-level 7 role admin desc Administrator
username user password "BwrsDbB+tABWGWpINOVKoQ==\n" encryption-level 7 role user desc User
cee-map default
precedence 1
priority-group-table 1 weight 40 pfc on
priority-group-table 15.0 pfc off
priority-group-table 15.1 pfc off
priority-group-table 15.2 pfc off
priority-group-table 15.3 pfc off
priority-group-table 15.4 pfc off
priority-group-table 15.5 pfc off
priority-group-table 15.6 pfc off
priority-group-table 15.7 pfc off
priority-group-table 2 weight 60 pfc off
priority-table 2 2 2 1 2 2 2 15.0
remap lossless-priority priority 0
!
vlan 1
!
vlan 5
name test
!
vlan 3820
router-interface Ve 3820
name LAN-Switch
!
qos map cos-mutation all-zero-map
...truncated
!
protocol lldp
system-description Brocade BR-SLX9140 Router
!
vlan dot1q tag native
police-remark-profile default
!
class-map cee
!
class-map default
!
no protocol vrrp
no protocol vrrp-extended
interface Ve 3820
ip proxy-arp
ip address 172.17.0.8/21
shutdown
!
interface Management 0
no tcp burstrate
no shutdown
vrf forwarding mgmt-vrf
no ip address dhcp
ip address 172.17.0.7/21
!
interface Ethernet 0/1
switchport
switchport mode access
switchport access vlan 1
no shutdown
!
interface Ethernet 0/2
switchport
switchport mode access
switchport access vlan 1
shutdown
!
..truncated