When I try to configure a trunk port on the slx 9140 I get following error
Testsystem02(config)# interface Ethernet 0/1
Testsystem02(conf-if-eth-0/1)# Switchport mode trunk
%%Error: Interface not bound to bridge
Testsystem02(conf-if-eth-0/1)#
D...
The command is ip route eg ip route 0.0.0.0/0 192.168.22.254 The command has to be configured in a rbridge config-rbridge-id 1)# ip route 0.0.0.0/0 192.168.22.254
