cancel
Showing results for 
Search instead for 
Did you mean: 

slx 9140 trunk configuration

slx 9140 trunk configuration

Giuseppe_Casabl
New Contributor
When I try to configure a trunk port on the slx 9140 I get following error

Testsystem02(config)# interface Ethernet 0/1

Testsystem02(conf-if-eth-0/1)# Switchport mode trunk

%%Error: Interface not bound to bridge

Testsystem02(conf-if-eth-0/1)#

Do you have any hints?

7 REPLIES 7

Mick_Day
New Contributor III
Could you please include the rest of your configuration, so that the error can be put into context

Giuseppe_Casabl
New Contributor
Unfortunately no. It doesn't work.

Mick_Day
New Contributor III
Hi I am not familiar with this specific error, but to configure a switchport to trunk mode, first you need to enable switching on the interface.
interface Ethernet 0/1
switchport
switchport mode trunkRegards
Mick
GTM-P2G8KFN