Data Center (VDX)
Questions and discussions about VDX
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

Resolved! VDX mac address table question

Hello all, one question about VDX mac address table. VDX switch run at Fabric cluster mode. two spine 8770, and more leaf of 6740 in one fabric cluster. Each 6740 connect to both 8770. The l3 Vlan VRRP-E configured on two spine 8770. In leaf 6740 w...

jeffery by New Contributor
  • 5078 Views
  • 9 replies
  • 0 kudos

Wired 802.1x Authentication Failed on Brocade VDX

Hello, I am trying to implement wired dot1x for machine authentication using certificate. As soon as I enabled dot1x authentication on the port, link protocol goes down with dot1x authentication failed. Machine Here is my setup: 1) Brocade VDX: ...

Tamang by New Contributor
  • 2978 Views
  • 3 replies
  • 0 kudos

VDX 6740 not working at 10G

Hello I have a VDX 6740 switch. All the 48 copper ports cannot negotiate to 10Gbit Slot Name Primary/Secondary Versions Status --------------------------------------------------------------------------- SW/0 NOS 6.0.2...

rick73 by New Contributor
  • 5564 Views
  • 8 replies
  • 0 kudos

VDX6940-port configuration

My customer has a VDX6940-64s and the 10gig ports were activated when they activated the port, how do you unassign a license from a port and reassign it to a different port?

goldtel by New Contributor
  • 1137 Views
  • 2 replies
  • 0 kudos

VDX 6740 vcs and spanning tree

Hi all, I have 4 vdx6740 switches configured in a logical chassis mode. I have to connect the via a distribuited lacp port channel (only with 2 switches because other ports are busy) to 2 nexsus switches in order to have access to some L2 Vlan config...

Ddevis by New Contributor
  • 1654 Views
  • 1 replies
  • 0 kudos
GTM-P2G8KFN