Data Center (VDX)
Questions and discussions about VDX
cancel
Showing results for 
Search instead for 
Did you mean: 

Forum Posts

VDX NOS: Can fabric virtual gateways be assigned to a VRF?

We currently use our VDX for only layer 2 functions. We are looking at turning on layer 3 routing, and the fabric route virtual gateway functionality. I see the VDX supports 32 vrfs, and the vrf documentation describes assigning ip interfaces and v...

wgs by New Contributor
  • 2566 Views
  • 6 replies
  • 0 kudos

Resolved! VDX mac address table question

Hello all, one question about VDX mac address table. VDX switch run at Fabric cluster mode. two spine 8770, and more leaf of 6740 in one fabric cluster. Each 6740 connect to both 8770. The l3 Vlan VRRP-E configured on two spine 8770. In leaf 6740 w...

jeffery by New Contributor
  • 4544 Views
  • 9 replies
  • 0 kudos

Wired 802.1x Authentication Failed on Brocade VDX

Hello, I am trying to implement wired dot1x for machine authentication using certificate. As soon as I enabled dot1x authentication on the port, link protocol goes down with dot1x authentication failed. Machine Here is my setup: 1) Brocade VDX: ...

Tamang by New Contributor
  • 2613 Views
  • 3 replies
  • 0 kudos

VDX 6740 not working at 10G

Hello I have a VDX 6740 switch. All the 48 copper ports cannot negotiate to 10Gbit Slot Name Primary/Secondary Versions Status --------------------------------------------------------------------------- SW/0 NOS 6.0.2...

rick73 by New Contributor
  • 4901 Views
  • 8 replies
  • 0 kudos
GTM-P2G8KFN