ā07-08-2020 12:50 AM
Hi Sir,Mam,
In Extreme Summit switches we can show the connected devices by
#show fdb
#show iparp
What is the command in VDX switches and in MLXe router?
Thank you,
Sazon
ā07-08-2020 04:03 AM
hi Sazon,
Once the interfaces are bound into the port-channel, only the logical interface (port-channel) will be reference in the outputs.
ā07-08-2020 03:10 AM
Hi Truyen,
It doesnāt show the Te 1/0/17 and Te 1/0/18
ā07-08-2020 02:59 AM
If the devices are in a port-channel, the MAC will show as being learned on the port-channel interface instead of the individual interfaces.
If you do āshow macā, do you see the MAC on the port-channel?
āshow ip arpā will only have the entries, if the VDX is doing L3.
ā07-08-2020 02:44 AM
Hi Truyen,
Mac-address cannot see
TE 1/0/17 and 1/0/18 is in port channel but cannot see also in interface status
With IP Arp there are options but cannot see also IP address of end devices unlike in summit iparp