New Documentation Published February 16th-22nd!

[SamPirok]

Our support teams published 59 new articles last week! Check out the new titles below!

Campus Fabric Articles

VOSS - RFC 2544 Throughput Test Devices Only Achieving 5Gps on 10GB Ports 

(CFD-13390) Traffic Loss and missing broadcast ARP entry on core switch after reboot 

Can I Remove/Delete w.x.y.z.GA (Backup Release) (Signed Release)? 

Why does a static route between VRFs remain in the routing table even after the BFD neighbor goes do... 

Switch fails to upgrade from 9.0.3 to 9.1.0 

ERS 4900/5900: How To See Ip Address of Neighbor Connected To Port In EDM 

Can 25G DAC cable be used in front panel ports in 5720 model switches?

Data Center Articles

Why does SLX response to public snmpv2c community that is not configured? 

Extreme NPB 9920 fails to boot 

BMC FW Does Not Update with SLXOS Upgrade 

What options are available for mac-move in the SLX 

XCO GUI inventory download file is incomplete 

After updated SLX9740-80C on SLX OS 20.6.3a we are seeing random flap interfaces.

EXOS Articles

Memory leak seen when using VxLAN 

PXE Boot process fails 

Can I specify the EXOS HTTPS cipher suite and TLS versions? 

Getting Started: Basic EXOS/SwitchEngine CLI Commands 

IPP on switch is not putting APs into correct profile 

Getting Started: EXOS/SwitchEngine Documentation 

General Articles

Can you connect from one ISW to another via SSH/Telnet? 

IdentiFi

Are weather channels supported on AP3912i and AP3935i (120, 124 and 128)?

SD-WAN Articles

Why my fabric status is "inactive" even if all is connected? 

Is it possible to cancel a scheduled upgrade on ExtremeCloud SD-WAN? 

Assistance troubleshooting device throughput 

Universal Articles

VLACP Keeps Port Down on NNI Link Between ERS 4900 and 7520-Fabric Engine Anytime 7520 Is Rebooted 

WiNG Articles

WiNG | Does the VX-Default-64AAP-License Key Stay Present When Adding Additional AAP Licenses 

AirDefense not saving disabled devices in alarms2C and search fails 

XIQ Articles

License Expiration Notices Not Received by All Local Administrators in XIQ Instance 

XIQ Advanced CLI output gets cut 

MFP doesn't help prevent the deauth attack 

AP5020 becomes Unresponsive 

AP3000 and AP5010 core dumped 10.7r2 or older OS - rebooting 

Users are getting disconnected from wireless every few minutes because of Access Restrictions settin... 

XIQ managed devices are offline after 25r1 update on NL-GCP 

How to activate Co-pilot on specific devices? 

Extreme Cloud IQ - How to change the Device Updates configuration defaults 

SR 2200 not taking syslog update 

VoIP Phone won't connect to a SSID/ unable to connect cisco VOIP phone to the wifi [XIQ] 

Why don’t 6GHz-capable devices connect directly to the 6GHz band on our tri-band Access Point (AP)? 

Advanced CLI with error "^-- unknown keyword or invalid input" 

Mac address OUI instant port profile limit 

Getting logged out/session timed out of XIQ/MSP session while logged in with user/admin account 

AP5020 template assignment doesn't work 

Mesh link formed between parent and child AP but child AP is showing offline on XIQ 

Some APs not communicating with XIQ and Device Update Failed 

How to install and setup the ExtremeCloud IQ Controller on the Universal Compute Platform 

XIQC-Why in Active-Active mode, the managed APs are not evenly distributed, when two APs adopted onl... 

Why is the ZTNA application not visible in XIQ? 

AP302W requests POE power 30 Watts instead of 25.5 Watts 

Inconsistent settings in device template and device level for dedicated sensor mode on AP510C 

Unable to extract wifi connection data if 30 days or more selected 

AP is not functional anymore (boot loop) 

PPSK - Creating Expired PPSK password gives error: The user cannot be saved because a unique value i... 

AP flash logging is full of log lines with "handle_ahUptime" 

AP305C/410C report 2 dbm value difference in TPC in Packet capture for the WIFI1 interface 

PPSK SSID object is not being pushed to APs 

XIQ | Method to Block All Private MAC Addresses 

Cannot use "Does not contain" when classifying SSID by location 

PPSK SSID not working after 25r1 update 

If you have any requests for new articles, please let us know! You can either comment on this post, or email me directly at community@extremenetworks.com.