ExtremeCloud IQ Controller - Page 14 - Extreme Networks

ExtremeCloud IQ Controller

Questions and discussions about ExtremeCloud IQ Controller (formerly Extreme Campus Controller)

Forum Posts

Sorted by:

Start a conversation

Resolved! XCC standalone (no XMC), adoption license violation?

Hello,There seems to be a discrepancy between the recommended SW version for XMC and XCC and only the later version of XCC is supporting the AP410C for instance.This being the case, I am wondering whether I could run XCC as as standalone VM, outside ...

Resolved! cluster ve6120: where can you see to which controller an ap belongs?

There are 2 sites connected by vpn. On every site there is a ve6120. I want to make sure that the access points on site 1 use the ve6120 on that site as primary controllersame for site 2, the ve6120 must be the primary controller on that site.I want ...

Resolved! XCC Dynamic VLAN Assignment

Hi Guys,I'm working on a customer deployment and got some issues using ExtremeControl and XCC (5.36.03).If I send RFC3580 Vlan Attributes to XCC from the Control, the 802.1x session from the client can't authenticate, even with the VLAN created under...

ve6120 5ghz indoor channels manually chosen allows you to max have 11 dbm

if I want to set the channel manually to the indoor 5Ghz channels 36-64. I can only select 11 dbm as max power.But if I set it to auto again, it mostly keeps the channel but sets the power to 13 dbm or even 15 dbm…So why is it limited to 11 dbm when ...

How can I integrad switches in XCC without reset factory default?

How can I integrad switches in XCC without reset factory default?

Top Kudoed Authors

User

Count

5

4

3

2

1

GTM-P2G8KFN