How can I integrad switches in XCC without reset factory default?
How can I integrad switches in XCC without reset factory default?
Forum Posts
Resolved! XCC Sites
Hello,We have two large buildings and several small off site offices. What is the recommended structure of sites in XCC when you have this type of wireless network? We have several floors and offices within the large buildings (Hospitals) and is in t...
Resolved! XMC logging in and out to Extreme switches constantly
these messages are showing in all Extreme switches -- the amount of messages and the frequency varies from switch to switch-- what causes XMC to login and logout constantly? why does it vary from switch to switch.?
Resolved! Upgrading Extreme Campus Controller E2120 from 4.76 to 5.26/5.36
We are going to be upgrading a customers E2120 wireless controller from 4.76 to either 5.26 or 5.36. We are working on getting the activation activation licenses at the moment. Can we jump straight from 4.76 to 5.26/36, or do we need to follow a spec...
Resolved! Wi-Fi controller redundancy, HA vs. primary, secondary
Hello,We are considering an Extreme wireless solution consisting of 2 x VE6120 ECC VMs set up redundantly.Scenario:2 sites with equal number of APs and clients approx. 1km apart250 APs total2000 clients total - staff crossing sitessufficient redundan...
