I recently found that when changing the sysName through Netsight it configures the old sysName as a display string on all ports that did not previously have a display string configured. X460G2-48p-10G4 running 15.7.3.1-patch1-6.xos NMS 7.0.6.27
Hello Guys, I'm trying the EXOS 22.2.1.5 at my lab (X460-G2 and NetSight 7.0.9.4) and I found an issue (still under investigation, but it vanishes if i downgrade to code 22.1.1.5)... The issue is related to some alarms arising on NS about "Interfac...
Our switches are sending syslog events to the netsight server. In the file /var/log/syslog/ I can see, that the messages being received - but in the NetSight Console, I can't see the source-ip. Without the IP it's hard to find the right events Does...
The default ciphers in freeradius on the EAC engine config for eap is: cipher_list = "ADH-AES128-GCM-SHA256:ADH-AES128-SHA:ADH-AES128-SHA256: ADH-AES256-GCM-SHA384:ADH-AES256-SHA:ADH-AES256-SHA256:ADH-CAMELLIA128-SHA: ADH-CAMELLIA256-SHA:AECDH-AES12...
Hi, the setup is a X430 with netlogin / MAC-auth via NAC. I use RFC3580 to dynamical assign the VLAN to the port (as the X430 doesn't support policy/roles). I'd like to auto shutdown ports if the client doesn't match a NAC rule or matches my last ...
