ExtremeCloud IQ- Site Engine Management Center - Page 283 - Extreme Networks

ExtremeCloud IQ- Site Engine Management Center

Questions and discussions about ExtremeCloud IQ-Site Engine Management Center

Forum Posts

Sorted by:

Start a conversation

Netisght flex view historical

Hi, i would use netsight to monitor others vendors and informations about this, the netsight only monitor troughput historical. Its possible create a flex view and create reports using this flex view with data historical??? or flex view is only to v...

monitor windows server with netsight

how do you get a windows server and netsight to communicate. i would like to have netsight monitor my windows servers and report back on status, ex, drive space, network uptime, system health, and the like. can it be done? and exactly how?

EXOS SNMP Traps for PSU fail

I have not found a way to get SNMPv3 traps to send when a PSU goes down. Does anyone have a way to alert on this, other than the logs? I know EXOS can send traps for this!

"Set policy" command not recognized on Securestack B3 switch CLI

Hey everybody! I'm doing some testing in my network to see if QoS is set up properly for VoIP (which I don't believe it is) as well as trying a few different approaches to the problem. I've pulled a spare B3 out of stock to use as a test switch. How...

Latency While Pinging Gateway of Vlan's Which is in our Core Switch

Hello, We have a BD8810 core switch and few models of Extreme EXOS Edge switches (like X430, X440, X460). All of our servers are connected to our core switch. Clients are connected in our Edge Switches. Our core switch having multiple VLAN's. Each...

Top Kudoed Authors

User

Count

94

93

41

17

17

GTM-P2G8KFN