cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 

Change time and timezone in netsight virtual appliance

Change time and timezone in netsight virtual appliance

Ledesma
New Contributor
Hello,

We did a new installation, but during intial setup the time & timezone was set incorrectly. Now the server is up and running. How can we change the time & timezone?

Thanks.
4 REPLIES 4

Ronald_Dvorak
Honored Contributor
I had such problem but I can't remember the details.... I think the issue was a wrong date/time setting on the VM server.
It was a little bit weird that the VM date/time mess up the NAC/Netsight time - so might be a good idea to check the VM date/time settings.
Mine is now also running on the same NTP as Netsight.

Michael_Kirchne
Contributor
Hi@all

I've got a similar issue but dateconfig changes only the system time:
Output of #date

27a04aa8cc15423fb34389b14910d09b_RackMultipart20150311-11830-124ofof-date_sys_inline.png



Timezone in Inventorymanager (VET):

27a04aa8cc15423fb34389b14910d09b_RackMultipart20150311-31002-3kggvi-date_inline.png



I also restarted the server.

Any idea?

Best Regards
Michael

Ledesma
New Contributor
Thank you Ronald. I called to GTAC and they told me the same. Already change the time successfully.

Ronald_Dvorak
Honored Contributor
The system has the following sricpts for postinstall changes installed in the /usr/postinstall directory...

network config = dnetconfig
SNMP config = snmpconfig
date/time = dateconfig
GTM-P2G8KFN