Delete syslog configuration

[Christopher_Tay]

I have a few X440 switches where they have been programmed with multiple syslog targets. I want to delete the old configuration and add in the proper syslog target. I have found multiple articles on how to configure syslog but none on how to delete old configuration. I have tried to "disable syslog" and then "unconfigure" but the entry under "show log config" still persists.

[Christopher_Tay]

Thanks.

[Tooley__Akiko]

The syslog configuration will remain if syslog is disabled. You will need to issue the command "configure syslog delete vr " to remove the entries.

[simon_bingham]

from my notes i have an example
# to delete all the syslog setup

configure syslog delete 172.28.0.104 vr "VR-Default" local0

[Patrick_Voss]

You should be able to delete each individual one with the beginning of the command below:

"configure syslog delete"

The rest you can tab out and see how specific it wants you to be.