Elrp Duration.

[Darrin_Tingey]

I would like to be able to change the ELRP disable ports duration, However, when I enter the Following. "config elrp-client periodic Student ports all interval 1 log-and-trap disable-ports ingress duration 120" . I get an error ERROR: An active session already exists for "CLI:student" . If I try to disable client then I get a failure client is disabled? I would like to be able to change this any help i found some Netsight scripts but not a command procedure.

Thank

[roxanne41watts]

To change the ELRP disable ports duration, you need to first unconfigure the existing ELRP client configuration for the VLAN, then apply the new settings. Try running the following commands:

1. Unconfigure ELRP Client: unconfigure elrp-client vlan_name

2. Apply New Settings: config elrp-client periodic vlan_name ports all interval 1 log-and-trap disable-ports ingress duration 120

This should resolve the issue with the active session error.

[Lhjohnson14]

You have to unconfigure elrp-client Vlan_name then make the change.