Enable ssh2 or telnet on XOS without using the console port
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎04-10-2018 03:23 PM
Hello, at all!
I have made a mistake by disabling ssh2 and telnet on an X460G2 (fw 22.4.1.4). And now i can't manage the switch per remote. Is there a possibility by enabling ssh2 or telnet on this switch without driving to the system and using the console port?
Thanks for your interesting!
I have made a mistake by disabling ssh2 and telnet on an X460G2 (fw 22.4.1.4). And now i can't manage the switch per remote. Is there a possibility by enabling ssh2 or telnet on this switch without driving to the system and using the console port?
Thanks for your interesting!
8 REPLIES 8
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎04-23-2018 10:55 AM
How about using the password recovery solution. .XSF file.
Don't know if I am allowed to copy and paste it here , Im sure there will be a GTAC document , just replace create account admin test test with Enable Telnet.
Basically autoexec.xsf should load before the configuration.
Don't know if I am allowed to copy and paste it here , Im sure there will be a GTAC document , just replace create account admin test test with Enable Telnet.
Basically autoexec.xsf should load before the configuration.
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎04-11-2018 04:07 AM
The web interface isn't working either ..
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎04-10-2018 04:32 PM
If snmp rw community is configured you may try to do reboot remotely - https://gtacknowledge.extremenetworks.com/articles/How_To/Setting-the-Next-Reboot-time-via-SNMP-with...
Options
- Mark as New
- Bookmark
- Subscribe
- Mute
- Subscribe to RSS Feed
- Get Direct Link
- Report Inappropriate Content
‎04-10-2018 04:32 PM
Is it possible to just set ssh to enable via SNMP or is there no such MIB object ?
![](/skins/images/1A7FFF514DEA26DBB1E00C76441BCEE5/responsive_peak/images/icon_anonymous_message.png)