Hello Zombie,Each VPLS is VFI (virtual forwarding instance) with attached VP (virtual port), this VPs might be port/vlan or PWs. In your case packets should be forwarded between 2 PWs. Also in your design P-routers acts as PEs, as they strip off MPLS...
>>» So I test VPLS core- spoke design and PE router are configured vpls include , P router are configured vpls exclude If you configured VPLS service on P1 and P2 it means that both switches are PEs for local attached service, and will do exclude 1...
Hello Zombie,The issue itself is not with the packets or EXOS config but with the “wireshark” settings as it could not filter out input correctly and print it like raw data. I’ve taken data from your picture “88 A2 00 77 5B 90 78 8A 20 BC 6E AD 88 A8...
Hello Karol, That 5m limitation is related to passive DAC cables, in your case you need to use active optic cables (AOC) which don’t have such distance limitation. Best Regards,Nikolay
Hello Alexander, You may do grep like below ap7502-6A231A*#show wireless radio detail | include ":R|CHANNEL |BSSID"Radio: 84-24-8D-6A-23-1A:R1, alias ap7502-6A231A:R1 CHANNEL : Current: 1 Configured: smt Width: 20MHz BSS-1 ...
