Finding Unused ports in NetSight

[davidj_cogliane]

I am trying to find the best way for a customer to locate ports that have been unused for an extended period, 30,60,90 days or more.

We recently upgraded a customer to x460-g2 switches running 15.6.3.1
We also installed NetSight 6.3.0.168

The customer used to use Ridgeline's unused port report but that report does not appear to exist in NetSight. I started trying to see if there was a mib I could poll in a flexview but did not find anything there either.

I am checking to see if I missed something or if someone has an alternative suggestion.

[davidj_cogliane]

This can now be done through capacity planning in Inventory Manager

[davidj_cogliane]

Thank you for the info, this should be very helpfull

[Ty_Izzet]

David,

A similar post was made in regards to Unused Ports in NetSight recently. this should provide some insight and steps on how to configure:

https://community.extremenetworks.com/extreme/topics/capacity-planning-ports-not-used-for-some-time

We also have an article related to the topic as follows:

https://gtacknowledge.extremenetworks.com/articles/Q_A/Is-There-Any-Way-to-Determine-What-Ports-Are-...

Hope this helps.