cancel
Showing results forĀ 
Search instead forĀ 
Did you mean:Ā 

Hardware Inventory Report

Hardware Inventory Report

MichaelM1
New Contributor II

Is there a way to create a report that list which devices have a single power supply installed vs a redundant power supply? or perhaps report the serial number of the power supply unit installed in each of my devices so I would know if only one serial number is reports a second power supply needs to be installed?

I can see the information stored in the device view, I just cant figure how to run a report against all my devices so I dont have to go into the device view on each device and manually check.

1 ACCEPTED SOLUTION

Ryan_Yacobucci
Extreme Employee
Try right clicking the device/devices --> Flexview --> Entity MIB --> Physical Entity Listing.

Thanks
-Ryan

View solution in original post

6 REPLIES 6

Ryan_Yacobucci
Extreme Employee
Try right clicking the device/devices --> Flexview --> Entity MIB --> Physical Entity Listing.

Thanks
-Ryan

thanks for guidance i also clear my query through this discussion

This looks like it might work for my needs.  Thanks for the help.  Still learning about these FlexView options.

Jtonic
New Contributor II
Hi - What type of device, EOS or EXOS? If it's EOS, we have 100's of EOS K10's, S4's and even some N7's still in production. We use a flexview run on a  schedule in XMC to print table information and email it to us for each chassis so we can see the number of installed power supplies and their status.
GTM-P2G8KFN